
bracket can be fabricated exactly as drawn and still miss its fixing point on site. Glass specified in one drawing may not match the framing shown in another, while a closure piece may have no workable installation access. Such discrepancies often become apparent only after fabrication has started or materials have arrived on site.
A curtain wall detail needs to explain how the selected components fit together and connect to the building. Missing dimensions or unresolved junctions can leave manufacturers and installers working from different assumptions. The following five mistakes show how those gaps affect fabrication and installation, and where an early clarification can prevent rework.
1. Missing Dimensions and Material Specifications

An elevation establishes the facade layout, but it rarely contains all the information needed to cut profiles, order glass or assemble a frame. Problems develop when the drawings show the intended appearance without defining the components behind it.
For example, changing the glass thickness may also require different glazing components. If the glass schedule changes while the section still shows the original arrangement, the purchasing team may order the new glass with the old gaskets or adaptors. The mismatch can emerge during assembly, after materials have already been delivered.
The same risk applies to dimensions. A curtain wall section detail may show a clear overall depth while leaving the frame position relative to the building unclear. The factory can produce components accurately to an assumed dimension, yet the completed assembly may not fit the intended location.
Before ordering materials, check that the relevant plans, sections and schedules describe the same arrangement. Identify the selected aluminum profile system and glass specification clearly. Where a dimension relies on an existing opening or structural position, establish that information before using it for fabrication. A note such as “confirm on site” does not resolve a dimension that the manufacturer needs to cut a component.
For purchasing, an unclear material description also makes supplier offers difficult to compare. A lower price may reflect a different component rather than a saving on the specified assembly.
2. Anchor Details That Do Not Match Site Conditions
A bracket that fits the curtain wall frame may still miss its intended fixing location on the building. The slab edge, supporting wall or steelwork on site may not match the position assumed in a standard drawing.
A bracket designed for a particular distance between the frame and slab can become a problem when the actual slab position differs. The installer may find that it cannot reach the intended fixing point. Revised brackets or a different connection arrangement may be needed. Such changes must be checked against the project’s structural requirements, not treated as routine site corrections.
Access is another concern. An anchor may look workable in section, yet become difficult to fasten once the frame, adjacent panel or interior finish is in place. If the fixing requires access behind an installed component, the installation sequence must allow for it.
Before manufacturing the brackets, check the curtain wall anchor detail against the actual support position and available installation space. Pay particular attention to unusual slab edges, corners and changes in facade depth, where a typical connection may not fit. Discovering these differences after bracket manufacture can interrupt both production and site work.
3. Insufficient Allowance for Thermal Expansion and Movement
Missing movement allowances can affect the lengths prepared for fabrication and the way components are assembled. Profiles or closure pieces made without the required joint space may need modification or replacement before installation. Temperature changes and movement in the supporting building also change the relationship between the frame and its surroundings.
Details that treat every junction as rigid can restrict that movement. A joint may look neat when installed but become compressed as components move. Depending on the arrangement, the result may include stressed seals, distorted framing or additional stress on the glass.
A closure panel or interior finish may bridge a joint that was intended to remain free to move. In that case, the curtain wall drawing may show an allowance, but the completed junction prevents it from functioning.
Check the frame connections and adjoining finishes together, especially where long runs of framing meet corners or other building elements. The required joint dimensions and connection arrangement must come from the selected system and project design. Copying a gap from an unrelated detail can create a false sense that movement has been addressed.
4. Incorrect Drainage Openings and Unclear Sealing Details

Sealing the exterior is not enough if the curtain wall sill detail leaves the drainage route undefined. The drawing needs to show where water leaves the frame and which joints require seals within the selected curtain wall system.
Drainage openings omitted from fabrication information, or placed incorrectly, can leave water trapped inside the glazing pocket. Correcting them becomes more difficult once the frame has been assembled and installed. Since drainage positions and opening requirements vary between systems, the drawings must follow the selected manufacturer’s arrangement.
More sealant will not necessarily fix the problem. Excess sealant can obstruct a drainage path, while a general instruction to seal a joint gives little guidance on which surfaces need sealing and which openings must remain clear.
Show drainage openings and seal locations together in the relevant detail. The fabricator can then prepare the specified openings, while assembly and installation teams can complete the seals without blocking them. Adding sealant to conceal a leak may leave the underlying problem unresolved. Broad waterproofing notes cannot replace clearly marked drainage and sealing locations.
5. Incomplete Junctions with Adjacent Walls and Cladding
The edge of the curtain wall is often where a drawing stops being specific. The frame may be fully detailed while its connection to an adjacent wall or metal cladding remains a generic line.
That omission can affect custom closure pieces. A metal trim manufactured before the adjoining construction is confirmed may be too narrow to cover the junction or too wide to fit behind the frame. Installers may then need replacement pieces, extra joints or removal of completed work. Confirming the visible joint width alone is insufficient. The concealed return and fixing position determine whether a trim can be produced and fitted as drawn.
A curtain wall to wall detail should explain the physical connection and the continuity of the required weather seals or flashing. It also needs to show how the closure will be installed. A concealed fixing is of little use if the next component blocks access before it can be secured.
Review the adjoining materials and their installation order together. At floor edges, the drawings should show the insulation and perimeter fire containment required by the project rather than leaving those areas undefined. Where the curtain wall meets metal facade panels, the manufacturer needs confirmed trim dimensions and an attachment arrangement before producing the interface pieces.
Resolve Drawing Gaps Before Fabrication

Unclear dimensions, material specifications and junction details should be resolved before the affected components are ordered for fabrication. Once production begins, correcting these drawing discrepancies becomes more difficult and may disrupt installation.
PRANCE design team help you to connect site measurement, design development and production for architectural metal systems. For metal panels and closure pieces adjoining curtain wall assemblies, contact PRANCE for a quotation to discuss the project drawings and interface requirements.
FAQs
Can Manufacturer Curtain Wall Details Be Used Without Changes?
Manufacturer details provide a reference for the selected system, but they do not automatically describe the project’s openings, structural supports or adjoining finishes. Adapt them to the actual location and confirm any differences with the system supplier. A catalogue section can explain the assembly while still leaving project dimensions and interface pieces unresolved.
How Do Architectural Curtain Wall Details Differ from Shop Drawings?
Architectural details communicate the intended arrangement, appearance and project requirements. Curtain wall shop drawings develop that information for the selected system, including dimensions, components and connections needed for fabrication and installation. The level of detail varies with the drawing package. A shop drawing title alone does not mean that every machining or assembly requirement has been resolved.
Do Curtain Wall Shop Drawings Replace Installation Instructions?
No. Shop drawings describe the project arrangement, while manufacturer installation instructions explain the system’s assembly and installation requirements. Teams need to use both where applicable. If they show conflicting information, clarify the difference before proceeding.
Can a Curtain Wall Detail Be Changed After Fabrication?
Yes, but review the change against work already completed and materials already ordered. If existing components do not suit the revised arrangement, updating the drawing alone is insufficient; affected parts may need modification or replacement. Obtain the necessary technical confirmation before modifying them. Issue the coordinated revision so the factory and installation team work from the same updated information.
